[Features]
* Repels blood-feeding insects, flying insects and other pests.
* Pad-applying the product together with a binder improves wash durability.

[Applications]

Suitable for textiles such as everyday apparel, outdoor clothing and bedding.

 

[Packaging]

17 kg/container

 

[Directions for Use]

Recommended dosage:

Liquid Form	5–7% aqueous solution
Emulsion Form	3–4% aqueous solution

Treatment method:

Padding (100% wet pickup) → Drying (105°C × 5 minutes) → Curing (130°C × 90 seconds)

* Padding treatment is recommended.

* Pad application together with a binder is recommended to improve wash durability.

* Addition during exhaustion processing is not recommended.

 

[Mosquito-Repellency Test Method]

A total of 30 test mosquitoes were placed in a breeding cage measuring approximately 25 cm × 25 cm × 25 cm. At 25 ± 2°C and 70%–80% RH, the sample was wrapped around the subject’s arm so that the skin was completely covered with no exposed areas, and the arm was then placed in the cage for 2 minutes.

During this period, the number of mosquitoes landing on the sample surface was recorded and the landing rate was calculated using the formula below. The repellency rate was calculated by comparing the number of landings on the treated sample with the number on the untreated sample.

[Test Results]

Sample (cotton fabric, 110 g/m²)	Number of Washes	Test Insect	Number of Mosquito Landings	Landing Rate (%)	Repellency Rate (%)
Sample Treated with 5% Liquid-Form Antibacterial and Insect-Repellent Agent	0	A	1	3.3	94.7
		B	1	3.3	95.0
	10	A	4	13.3	78.9
		B	5	16.7	75.0
Untreated Sample	—	A	19	63.3	—
	—	B	20	66.7	—

* The test insect was the Asian tiger mosquito (Aedes albopictus).

* Test insects A and B were both male.

 

[Precautions]

* The active ingredient in this product is anionic; avoid contact with cationic substances.

* A curing temperature of 130°C to 150°C for approximately 1 minute is recommended.

* Because this product is water-dispersible, separation may occur during long-term storage. Shake the container thoroughly before use and filter the product through a 50–100 mesh filter cloth.

* Use diluted finishing solution on the day it is prepared.

* This agent contains a small amount of formalin and must not be used on clothing for infants or young children. When applying it at high concentrations, pay close attention to residual formalin levels.

* Before use, carefully evaluate all relevant dye fastness properties, including fluorescent whiteness, color change during processing, lightfastness and abrasion resistance.

 

Because we cannot control each customer’s scope of use or manufacturing process, we cannot make assurances regarding the customer’s finished product. Users are advised to conduct independent testing to confirm suitability for their product and processing conditions. Users are responsible for ensuring that the products they use comply with all applicable current laws and regulations.