MK-X-604 Inorganic Antibacterial Deodorizing Agent for Films
Physical Properties
| Appearance | : White, odorless powder |
| Heat Resistance | : Approx. 800°C |
| Average Particle Size | : 2.5 μm |
| Applications | : Film (PP, PE, and others) |
| Recommended Dosage | : Film: 0.2–1.0 wt% |
| Packaging | : 20 kg/drum (50 L fiberboard drum) |
| Precautions |
* Determine the final dosage based on dispersibility, resin type, other additives, and related characteristics. * Prepare a sample first and evaluate antibacterial efficacy, discoloration, and other performance characteristics. |
Antibacterial Performance
| Appearance | : White, odorless powder |
| Heat Resistance | : Approx. 800°C |
| Average Particle Size | : 2.5 μm |
| Applications | : Film (PP, PE, and others) |
| Recommended Dosage | : Film: 0.2–1.0 wt% |
| Packaging | : 20 kg/drum (50 L fiberboard drum) |
| Precautions |
* Determine the final dosage based on dispersibility, resin type, other additives, and related characteristics. * Prepare a sample first and evaluate antibacterial efficacy, discoloration, and other performance characteristics. |
Deodorizing Performance
Test method: Prepare 70 L of each gas at the specified concentration.
Seal the gas with 1.0 g of MK-X-604 in a 6 L Tedlar sampling bag within 1 minute. Measure the gas concentration after 1 hour and 3 hours using detector tubes.
| Test Gas | Initial Gas Concentration | 0 Hours | 1 Hour | 3 Hours |
|---|---|---|---|---|
| Ammonia | 23 ppm | 6 ppm | N.D | N.D |
| Acetic Acid | 10 ppm | 8 ppm | 4 ppm | 1 ppm |
| Valeric Acid | 13.5 ppm | 13.5 ppm | 1 ppm | N.D |
| Hydrogen Sulfide | 2.0 ppm | 1.5 ppm | N.D | N.D |
| Pyridine | 14 ppm | 12 ppm | 10 ppm | 2 ppm |
| Methyl Mercaptan | 3.5 ppm | 2.3 ppm | 1 ppm | N.D |
| Trimethylamine | 95 ppm | 80 ppm | 10 | N.D |
N.D. = detected gas concentration below 0.2 ppm