TAYCA Conductive Polymer Materials
Following Dr. Hideki Shirakawa’s Nobel Prize, it became widely known that conductive polymers can be made electrically conductive through dopants.
Doped conductive polymers can exhibit conductivity comparable to metals, although their characteristics and forms differ greatly from metallic materials.
TAYCA recognized this technology early and combined it with its proprietary sulfonation technology to develop the TAYCA series of conductive-polymer products, including dopants, monomers, and conductive-polymer dispersions suited to various requirements and properties.
TAYCAConductive Polymer MaterialsExpected to replace indium tin oxide (ITO) in applications such as capacitors, antistatic materials, and touchscreensand to be widely used in organic electroluminescence (EL), organic thin-film solar cells, and other applications.
Grades
Dopant-Containing
| Product Name | Solvent | Iron(III) p-Toluenesulfonate (%) | Moisture (%) |
|---|---|---|---|
| Tayca AF50B | n-Butanol | 50 | ≤1 |
| Tayca AF50E | Ethanol | 50 | ≤5 |
Monomer
Tayca TRON X-Series Monomers
Conductive Polymer Dispersion
| Product Name | Solvent |
Solids Content (%) |
Conductivity (S/cm) | Properties |
|---|---|---|---|---|
| Tayca PE1 | Water | 1.0 | 300 | General-purpose conductive-polymer dispersions available in three grades according to application. |
| Tayca PE2 | Water | 1.0 | 1,000 | |
| Tayca PE3 | Water | 0.8 | 1,500 | |
| Tayca PA1 | Water | 0.9 | 300 | Suitable for antistatic applications. |
| Tayca PS1 | Water | 1.0 | 1,000 | High Viscosity (1–3 Pa·s) |
| Tayca PH1 | Water | 2.0 | 0.05 | |
| Tayca PH2 | Water | 2.0 | 1 | |
| Tayca PD1 |
Dimethyl Sulfoxide (DMSO) | 0.5 | 1,000 | Dimethyl Sulfoxide (DMSO) Solvent |
*Conductivity measured with DMSO added.
*Values are representative.
TAYCA P-Series conductive-polymer dispersions offer high transparency and high conductivity and can be used in a wide range of applications. Solvents other than water are also available.