TAYCA Conductive Polymer Materials

     Following Dr. Hideki Shirakawa’s Nobel Prize, it became widely known that conductive polymers can be made electrically conductive through dopants.
     Doped conductive polymers can exhibit conductivity comparable to metals, although their characteristics and forms differ greatly from metallic materials.
     TAYCA recognized this technology early and combined it with its proprietary sulfonation technology to develop the TAYCA series of conductive-polymer products, including dopants, monomers, and conductive-polymer dispersions suited to various requirements and properties.
     TAYCAConductive Polymer MaterialsExpected to replace indium tin oxide (ITO) in applications such as capacitors, antistatic materials, and touchscreensand to be widely used in organic electroluminescence (EL), organic thin-film solar cells, and other applications.

Grades

Dopant-Containing

Product NameSolventIron(III) p-Toluenesulfonate (%)Moisture (%)
Tayca AF50Bn-Butanol50≤1
Tayca AF50EEthanol50≤5

Monomer

Tayca TRON X-Series Monomers

Conductive Polymer Dispersion

Product NameSolvent Solids Content
(%)
Conductivity
(S/cm)
Properties
Tayca PE1Water1.0300 General-purpose conductive-polymer dispersions available in three grades according to application.
Tayca PE2Water1.01,000
Tayca PE3Water0.81,500
Tayca PA1Water0.9300 Suitable for antistatic applications.
Tayca PS1Water1.01,000 High Viscosity (1–3 Pa·s)
Tayca PH1Water2.00.05
Tayca PH2Water2.01
Tayca PD1 Dimethyl Sulfoxide
(DMSO)
0.51,000 Dimethyl Sulfoxide (DMSO) Solvent

*Conductivity measured with DMSO added.
*Values are representative.

TAYCA P-Series conductive-polymer dispersions offer high transparency and high conductivity and can be used in a wide range of applications. Solvents other than water are also available.