Thermally Degraded Polyolefin Waxes SANWAX and VISCOL
The SANWAX Series (polyethylene waxes) and VISCOL Series (polypropylene waxes) are low-molecular-weight polyolefins produced through the thermal degradation of polyolefins.
Properties
1. Good compatibility with polyolefin resins.
2. Softening point and hardness comparable to polyolefin resins, with a higher softening point and crystallinity than natural waxes.
3. Melt viscosity similar to animal waxes, mineral waxes, and petroleum waxes.
4. Thermally degraded polyolefin waxes have a broad molecular-weight distribution.
5. Compatible with non-polyolefin resins such as PC, PBT, and ABS.
6. Compared with polymerization processes, polyolefin thermal degradation is suitable for small-lot production and can precisely meet a variety of needs.
Applications
These products are used in a wide range of fields, including as pigment and filler dispersants, binders for inks, anti-sagging agents for coatings, abrasives, flow improvers, mold-release improvers, softening-point enhancers, wear-resistance improvers, matting agents, and lubricants.
| Applications | SANWAX | VISCOL |
|---|---|---|
| Pigment Dispersant for Polyolefins | ◎ | ◎ |
| Filler Dispersant for Polyolefins | ◎ | ◎ |
| Flow Improver for Polyolefins | ◎ | ◎ |
| Improves the Flow of Filler-Reinforced Polyolefin Resins | ◎ | ◎ |
| Improves the Flow of Recycled Polyolefin Resins | ◎ | ◎ |
| Mold-Release and Flow Improver for Non-Polyolefin Resins and Rubber | ◎ | ◎ |
| Wear-Resistance Improver for Paints and Inks | ◎ | ○ |
| Gloss-Reducing Agent for Coatings | ◎ | ○ |
| Wear-Resistance Improver for Thermal-Transfer Inks | ○ | |
| Softening-Point Enhancer for EVA | ○ | ○ |
| Lubricant for PVC | ○ | ◎ |
| Release Agent for Polyurethane Molds | ◎ | ○ |
| Shoe-Polish Formulation Ingredient | ◎ | |
| Oil Gelling Agent | ◎ | ○ |
| Softening-Point Enhancer for Asphalt | ◎ | |
| Durability Improver for Asphalt | ◎ | |
| Ceramic Binder | ○ | ○ |
SANWAX Series Grades
| Product Name | Appearance | Color Number | Molecular Weight |
Melt Viscosity (160°C) mPa·s |
Melting Point °C |
Penetration dmm |
|---|---|---|---|---|---|---|
| SANWAX 161-P | White Powder | 30 | 27,000 | 3,400 | 107 | 2.0 |
| SANWAX 131-P | 30 | 20,000 | 900 | 106 | 3.5 | |
| SANWAX 151-P | 30 | 13,000 | 250 | 102 | 4.0 | |
| SANWAX 171-P | 30 | 10,000 | 160 | 102 | 4.5 |
VISCOL Series Grades
| Product Name | Appearance | Color Number | Molecular Weight |
Melt Viscosity (160°C) mPa·s |
Melting Point °C |
Penetration dmm |
|---|---|---|---|---|---|---|
| VISCOL 330-P | White Powder | 50 | 40,000 | 4,000 | 145 | <1.0 |
| VISCOL 440-P | 50 | 27,000 | 1,800 | 144 | <1.0 | |
| VISCOL 550-P | 50 | 13,000 | 160 | 139 | <1.0 | |
| VISCOL 660-P | 1*1 | 10,000 | 60 | 136 | 1.5 | |
| VISCOL LM500 | Pale Yellow Powder | 1*1 | 30,000 | 1,400 | 125 | <1.0 |
[Test Methods]
Color number: Hazen method (*1 Gardner method); Mw (weight-average molecular weight): high-temperature GPC method
Melt viscosity: Brookfield-type viscometer; softening point: DSC method; penetration: ASTM D 1321-61T
Other Fine-Chemical Products
- SR-D50F Anti-Dripping Agent
- Thermally Degraded Polyethylene Wax
- PEL Conductive Functional Additive