NOVATEC™ PP BC03B Polypropylene Resin
BC03B is a polypropylene resin manufactured by Japan Polypropylene Corporation. NOVATEC™ PP BC03B Polypropylene Resin,Impact-Resistant / Block-Copolymer PP (Propylene-Ethylene Block Copolymer)primarily used for injection molding.
Physical Properties
| Test Item | Test Method | Unit | Physical Property Values |
|---|---|---|---|
| Melt Flow Rate (MFR) | ISO 1133 | g/10min | 30 |
| Density | ISO 1183 | g/cm³ | 0.90 |
| Tensile Modulus | ISO 527-1 | MPa | 1,400 |
| Tensile Yield Strength | ISO 527-1 | MPa | 26 |
| Nominal Tensile Strain at Break | ISO 527-1 | % | 30 |
| Flexural Modulus | ISO 178 | MPa | 1,350 |
| Flexural Strength | ISO 178 | MPa | 36 |
| Charpy Impact Strength (23°C) | ISO 179 | kJ/m² | 6.5 |
| Charpy Impact Strength (-20°C) | ISO 179 | kJ/m² | 3.5 |
| Heat Deflection Temperature | ISO 75 | — | 100 |
| Rockwell Hardness (R Scale) | ISO 2039-2 | — | 90 |
| Gloss | JIS Z8741 | % | 50 |
| Spiral Flow Length | JPP Method | mm | 800 |
| Molding Shrinkage | JPP Method | % | 1.0～1.4 |