MK-X-604 Inorganic Antibacterial Deodorant for Films
Physical Properties
| Appearance | : White, Odorless Powder |
| Heat Resistance | : Approximately 800°C |
| Average Particle Diameter | ： 2.5μm |
| Applications | : Films (PP, PE, and Others) |
| Recommended Addition Level | : Films: 0.2–1.0 wt% |
| Packaging | : 20 kg/Drum (50 L Fiber Drum) |
| Precautions |
* Determine the final addition level based on dispersibility, resin type, the characteristics of other additives, and related factors. * Prepare a sample first and evaluate antibacterial performance, discoloration, and other properties. |
Antibacterial Performance
| Appearance | : White, Odorless Powder |
| Heat Resistance | : Approximately 800°C |
| Average Particle Diameter | ： 2.5μm |
| Applications | : Films (PP, PE, and Others) |
| Recommended Addition Level | : Films: 0.2–1.0 wt% |
| Packaging | : 20 kg/Drum (50 L Fiber Drum) |
| Precautions |
* Determine the final addition level based on dispersibility, resin type, the characteristics of other additives, and related factors. * Prepare a sample first and evaluate antibacterial performance, discoloration, and other properties. |
Deodorizing Performance
Test Method: Each gas was prepared in a 70 L bag at the specified concentration.
The gas and 1.0 g of MK-X-604 were sealed in a 6 L Tedlar sampling bag within one minute. Gas concentrations were measured with detector tubes after 1 and 3 hours.
| Test Gas | Initial Gas Concentration | 0 Hours | 1 Hour | 3 Hours |
|---|---|---|---|---|
| Ammonia | 23 ppm | 6 ppm | N.D | N.D |
| Acetic Acid | 10 ppm | 8 ppm | 4 ppm | 1 ppm |
| Valeric Acid | 13.5 ppm | 13.5 ppm | 1ppm | N.D |
| Hydrogen Sulfide | 2.0 ppm | 1.5 ppm | N.D | N.D |
| Pyridine | 14 ppm | 12 ppm | 10 ppm | 2 ppm |
| Methyl Mercaptan | 3.5 ppm | 2.3 ppm | 1ppm | N.D |
| Trimethylamine | 95 ppm | 80 ppm | 10 | N.D |
N.D. = Detected Gas Concentration of 0.2 ppm or Less