Microkiller Deodorant

Testing by Odor Category and Odor Component (Compliant with SEK Textile Product Certification Standards)

Malodorous SubstancesPerspiration OdorAging OdorExcretion OdorTobacco Smoke OdorHousehold Waste OdorAmmonia OdorDeodorant Applicable Grades
Ammonia○○○○○○MK-Ka+ + MK-Kc
Acetic Acid○○○○MK-Kc
Isovaleric Acid○○MK-Kc
Nonenal○MK-Ko+
Methyl Mercaptan○○MK-Ke
Hydrogen Sulfide○○○MK-Kc
Indole○MK-Ku
Acetaldehyde○MK-Ko+
Pyridine○MK-Ka+、MK-Kc
Trimethylamine○MK-Ka+、MK-Kc
Deodorant Grade
Recommended Combination
MK-KcMK-Kc / MK-Ko+MK-Kc / MK-Ke / MK-KuMK-Kc / MK-Ko+MK-Kc / MK-KeMK-Ka+

Application Examples for Nonwoven Fabrics Treated with Deodorant

ApplicationDeodorant DosageAmmoniaAcetic AcidHydrogen SulfideIndoleMethyl MercaptanAldehydesToluene
Pet Odor / Body OdorMK-Kc / 10 g○○○
Pet Odor / Excretion OdorMK-Ka+ 5 g / MK-Ke 10 g○○◎○
For Pet Odor and IndoleMK-Ke 10 g / MK-Ku 5 g
For Air Purification: Four Types of GasMK-Kc 5 g / MK-Ko+ 10 g○○○○
For Air Purification: Five Types of GasMK-Kc 5 g / MK-Ko+ 5 g / MK-Ku 15 g○○△△△
For Air Purification: Aldehyde GasesMK-Ko+ / 10 g◎
General-Purpose MasksMK-Kc / 10 g○○○
Caregiving MasksMK-Ka+ 5 g / MK-Ke 10 g◎○◎○

Deodorizing Performance Test on a Filter Against Five Odors

[Objective]

A filter containing MK-Kc, MK-Ko+, and MK-Ku was tested for deodorizing performance against five odors.

[Deodorant Formulation]

As shown in the table below, the deodorants were added to a water-soluble resin binder and applied to the filter surface at 75 g/m².

Mixing Ratio (Grade)Total Deodorant LoadingMK-Kc g/m²MK-Ko+ g/m²MK-Ku g/m²
Acetic Acid, Hydrogen Sulfide,
Ammonia, and Amines
AldehydesToluene
5/5 (MK-Kc/MK-Ko+)1055—
5/5/10 (MK-Kc/MK-Ko+/MK-Ku)205510
10/5/10 (MK-Kc/MK-Ko+/MK-Ku)2510510

[Results]

• The combination of MK-Kc, MK-Ko+, and MK-Ku demonstrated deodorizing effects against acetic acid, ammonia, aldehydes, and toluene.

• Because MK-Ku significantly improved deodorizing performance against ammonia, a mixing ratio of 5/5/10 in the table above is considered optimal.

[Deodorization Test Method]

An odor gas and a 10 cm² deodorizing sample were placed in a 3 L test bag, and the residual gas concentration was measured after 30 minutes and 2 hours.

Test gas concentrations: 15 ppm acetic acid and acetaldehyde, 30 ppm ammonia, and 25 ppm toluene

Fabric DeodorizationPerformance Test

[Processing Method]

1. Mix the deodorant with water and disperse it using ultrasonic agitation.
2. Add a binder containing resin solids equal in weight to the deodorant to the dispersion and mix to prepare the deodorizing treatment liquid.
3. Immerse the fabric in the treatment liquid so that 2–3 g of deodorant adheres to the fabric.
4. After preliminary drying, heat the fabric in a dryer at 120°C for 10 minutes.

[Fabric] Textile with a basis weight of 200 g/m²
[Binder]

Manufacturer / GradeResinTypeSolids ContentRemarks
Goo Chemical / RD-192AcrylicEmulsion30%—
Goo Chemical / Plascoat Z-565PolyurethaneWater-Soluble25%TG=64

Deodorization Test Results

Add-on Amount g/m²Unwashed
MK-KcMK-KoBinder Type / Solids ContentAmmoniaAcetic AcidIsovaleric AcidHydrogen SulfidePyridineAcetaldehyde
00None5340150277
11Acrylic 28386771007374
12Acrylic 39190811007086
21Acrylic 39793841008479
21Polyurethane 39593801007282